Will pay reasonable ****pping costs - but please ask only if you can
use a given item set.
1) 6 sets ferrite cores P14/8/I-3C81-A400 (ie: gapped) and retaining
clips.
2) Rather old, untested, Analog Devices 310J amplifier module 3L x 1.5W
x 0.75H.
3) Misc old but good electrolytic caps, and various digital ICs; aded
some analog parts.
4a) Ye Olde "Q" meter; very well packed for ****pping, and i will pay
the first $50 of ****pping.
4b) Incomplete meter has been gutted, due to lack of interest.
Available from it is:
* the meters: "Q" panel meter (0-250) is 100uAFS; the "Multiply Q by"
panel meter is 145uAFS;
* dual variable cap: 14-485pF and 10-245pF, 5"long including shaft, 3.25
wide, 2" high;
* power transformer and choke;
* Acme Electric 50VA line regulating transformer (refurbished);
* other misc parts: pots, fuse holder, momentary on/off/on toggle, etc.
* Shakesperian FETs: 0A2, 0B2, 6X4, 5763.
5) G.E. maggie GL-5J29 no magnet.
Good vacuum, presumedly still works. "Classified" stampped on it; made
for use in England for the war.
Is there any museum that would like to add this to their collection?
6) *taken*
7) Good for power xmitter: variable cap 34-1134F, 6"wide, 4"high, 9"
long including shaft.
8) HP310A wave analyzer with manual.
9) Datak 12-750 Photo etch PCB kit
10) Tektronix 7A13 Differential Comparitor
11) Tektronix 7D13 Digital Multimeter with LEMO connector for the
temperature sensor input (and a schematic for that).
|
