Dear,
On our boat we have a complete B&G h1000 network included with the
CND1000 plotter.
Last year the CND1000 plotter becames defective and was not able to
repair anymore.
To find an alternative, we choose for the Simrad NX40 plotter.
The plotter has also a GPS receiving antenna which is communicating
through Simnet with the Simrad plotter.
To be able to receive/transmit the data on the plotter from/to the B&G
Fastnet, i have connected both networks to eachother via the B&G NMEA
universal interface box with the Simrad AT10 universal converter.
The problem is: only GPS signal goes from Simnet to B&G=B4s Fastnet and
only =B4heading=B4 from B&G comes to Simnet and is visible on the Simrad
NX40 screen.
Depth, boatspeed, windspeed and winddirection are not visible on the
NX40. I=B4ve checked on the settings in the B&G h1000 system and all
this parameters are on if i checked on NMEA OUT settings.
What can be the problem? Is this a software setting in B&G or an NMEA
sentence in the B&G that must be changed?
If somebody can help me with this problem, you can mail me to:
tanghe.bart@[EMAIL PROTECTED]
Regards.
Bart Tanghe
