by "Greg" <ash_5@[EMAIL PROTECTED]
>
Apr 11, 2008 at 08:10 PM
You can use either connector, though I'd call it DC plug/socket connector
and not coaxial connector ;)
If you need the instructionmanual I've got it here:
http://rfelektronik.se/manuals/1/icom/IC-R8500_instructions.pdf
//Greg
<miso@[EMAIL PROTECTED]
> wrote in message
news:ecfec262-d920-4f60-bb7a-38208d6472d3@[EMAIL PROTECTED]
> The R8500 has two ways to feed it power. There is the 4 pin connector
> and the coaxial connector. I'm assuming for bench use, you attach a
> 13.8V to the coaxial connector. For gel cell use, you use the 4 pin
> connector. However, the OPC-023C power connector, designed for mobile
> use, goes to the 4 pin connector. So is it OK to feed 13.8V to the 4
> pin connector?
