On Jun 28, 1:50=A0am, Connah <con...@[EMAIL PROTECTED]
> wrote:
> Hi all!
>
> I have both a PRO-97 and an older Realistic PRO-2022. I have come
> across an interesting problem on which I would like your collective
> input. While my PRO-97 scans the 923 - 927MHz range for ****table phone
> handset frequencies, my PRO-2022 scans the 902 - 905MHz range for
> ****table phone base frequencies. When someone activates their phone,
> my PRO-97 will stop on, for example, 924.525MHz and my PRO-2022 will
> stop on 903.125MHz. On BOTH scanners, I hear BOTH sides of the same
> conversation. If, during that conversation, I switch my PRO-2022 over
> to 924.525MHz, I STILL hear both sides of the conversation. HOWEVER,
> and here's the issue, if I tune my PRO-97 to 903.125MHz, I hear
> NOTHING but static. Both of the scanners are sitting right beside each
> other.
>
> So why would my PRO-2022 be able to hear both sides of the
> conversation on BOTH frequencies, but my PRO-97 only be able to hear
> the conversation on ONE frequency? This disturbs me since the PRO-97
> is much more advanced...and much more expensive! If any one can shed
> light on this, I sure would appreciate it.
>
> Thanks all!
>
> Matthew
Perhaps the image of the first IF and the tx/rx split is the same?
|
