Re: Slightly OT. Heat and a Bench Light ...

On Mon, 7 Jul 2008 01:28:51 +0100 "Arfa Daily"
<arfa.daily@[EMAIL PROTECTED]
> wrote:

>So, if we believe the rating stamped on both the bulb itself, and its
box, 
>and you are prepared to believe me when I tell you that with this bulb 
>fitted, the temperature of the shade was a whole heap hotter, then 
>somewhere, there must be another explanation than the two that you
believe 
>are the only possibilities. 

I believe everything you've told us about the bulbs. I have no reason
not to, but 60 Watts is still just 60 Watts.

There's no way to get more heat out of it than that. So either the old
60 was actually less than 60 or the new 60 is more than 60 (or both.)
Or you're mistaken about the new ones running hotter, which I agree is
the less likely option.

One other possibility occurred to me, and that is that your socket
chose this moment to become resistive, which could have raised the
total power above 60 Watts and concentrated that extra power
dissipation in the socket - consistent with your observations. I'm not
familiar with the socket you describe, so maybe you can judge the
likelyhood of this. I suspect that if this had happened, the light
output would have been affected and you would have noticed.

-
-----------------------------------------------
    Jim Adney            jadney@[EMAIL PROTECTED]
           Madison, WI 53711 USA
-----------------------------------------------