On 5=A4=EB30=A4=E9, =A4U=A4=C88=AE=C938=A4=C0, Steve Y
<steverem...@[EMAIL PROTECTED]
> wrote:
> How about MEDChttp://www.medc.com/
?
>
> Steve
>
>
>
> epmd0...@[EMAIL PROTECTED]
wrote:
> > Dear friends,
>
> > Can anyone tell me except R.Stahl, CEAG and ATX, is there any
> > manufacturer producing EExde MCB?
>
> > There's a project requiring many distribution panels and the general
> > specs are as below:
>
> > 1. main MC: mounted in EExd box, 3x50A/65KA, connected to below EExe
> > GRP terminal box. the combination is on left side.
>
> > 2. branch MCB x 10pcs: all EExde IIC, 3x20A/10KA, mounted inside EExe
> > GRP box, with manual handles and terminal blocks, Earthing bus bar.
> > This box is on right side and connected to left side boxes.
>
> > 3. whole panel with SS316 standing sup****t and SS316 rain-****eld, all
> > epoxy painted 110 micron.
>
> > These panels seems to be from only above mentioned producers, but I'm
> > searching for other producers with competitive price......the job is
> > very big and I haven't found other solution.
>
> > In case anyone is interested in this or has information to tell me,
> > please send me directly to my e-mail address:
>
> > epmd0...@[EMAIL PROTECTED]
>
> > Best Regards
>
> > John- =C1=F4=C2=C3=B3Q=A4=DE=A5=CE=A4=E5=A6r -
>
> - =C5=E3=A5=DC=B3Q=A4=DE=A5=CE=A4=E5=A6r -
Hi Steve,
Thanks for your information. Actually their EExed GRP products are
from CEAG, not produced themselves...
Anyway, thanks.
John
|
